Carbon stainless Aluminum 500w 750w 1000w 1325 fiber laser cutting
machine
Suitable materials
Application Materials: Fiber Laser Cutting Equipment is suitable for metal cutting like
Stainless Steel Sheet, Mild Steel Plate, Carbon Steel Sheet, Alloy
Steel Plate, Spring steel Sheet, Iron Plate, Galvanized Iron,
Galvanized Sheet, Aluminum Plate, Copper Sheet, Brass Sheet, Bronze
Plate, Gold Plate, Silver Plate, Titanium Plate, Metal Sheet, Metal
Plate, Tubes and Pipes, etc.
Application Industries
Fiber Laser Cutting Machines are widely used in manufacture
Billboard, Advertising, Signs, Signage, Metal Letters, LED Letters,
Kitchen Ware, Advertising Letters, Sheet Metal Processing, Metals
Components and Parts, Ironware, Chassis, Racks & Cabinets
Processing, Metal crafts, metal art ware, elevator panel cutting,
hardware, auto parts, Glasses Frame, Electronic Parts, Nameplates,
etc.
Special control box we made for this machine
The control box of fiber laser cutting machine is configured
separately to reduce interference and easy to maintain.
To ensure the stability and avoid signal interference,we use the
following measures based on electrical technology :
1. The main circuit and control circuit are connected by wires
separately bypass.
2. The wire of main controller use shielded or twisted wire.
3. The connection of motor and driver use separate outlet to avoid
parallel with other wires.
4. I/O interface chip,controller,sensor and the connector are as
close as possible.
5. The connect wire between upper and lower equipment use the
Aerial plug connector and Weidmuller terminal block.
500W Main Configuration Instructions
| No. | Name | Quantity | Origin and manufacturer name |
| 1 | Lasers |
| (1) | Fiber laser | 1 set | |
| (2) | Laser Power |
| 2 | The optical path and the cutting head |
| Special laser cutting head | 1 set | |
| 3. | Host Machine |
| (1) | Machine bed | 1 set | Homegrown/Jinan Iron and Steel |
| (2) | Gear rack | 1 set | From Taiwan |
| (3) | Servo motor and drive | 3 set | Imported from Japan |
| 4 | CNC and software systems |
| CNC systems(With control software) | 1 set | Cypcut control system |
| 5 | Standard accessories |
| Water cooling | 1 set | TENGFEI |
500W Main Parameters
| Model | RF-1325-750 |
| Laser type | Fiber laser |
| Laser working medium | Fiber |
| Laser wavelength | 1070 nm |
| Rated output power | 750 W |
| Beam quality | ＜0.373mrad |
| Effective cutting range | 2500×1300(mm) |
| Table axial positioning accuracy | ≤±0.03mm/m |
| Repeat positioning accuracy table | ≤±0.02mm/m |
| Cutting speed | ≤30m/min |
| Maximum table load | 1600KG |
| Power Ratings | Three-phase AC 380V 50Hz |
| Equipment electric power | 10-20KW |
| Total power protection class | IP54 |
Processing capacity Description
| Material | Thickness | Auxiliary gas |
| Carbon Steel | ＜8mm | Oxygen
|
| Stainless Steel | ＜6mm | Oxygen
|
| Aluminum | ＜3mm | Nitrogen |
Part of the process parameters
| Material | Thicknes(MM) | Gas | Maximum cutting speed |
| Carbon Steel | 1 | Oxygen | 3m/min |
| 2 | Oxygen | 1.2m/min |
| 5 | Oxygen | 0.5m/min |
| Stainless Steel | 1 | Oxygen | 3m/min |
| 3 | Oxygen | 0.5m/min |
| Aluminum | 1 | Oxygen | 2m/min |
| 2 | Oxygen | 0.5m/min |
RF-1325-500 Fiber laser cutting machine samples
Machine detail photos
